St Avenue Logistic Sdn Bhd
November 24, 2024, 03:36:34 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: SMF - Just Installed!
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: five fingers flow-Brother Laser Printer, Fax & Brother Multifunction Printer Err  (Read 55 times)
fgfhfnf2
Newbie
*
Posts: 21


View Profile Email
« on: April 19, 2011, 02:42:19 PM »

Brother Laser Printer,cheap babolat tennis rackets, Fax & Brother Multifunction Printer Error Codes & How to Fix Them
Brother offers an entire selection of fax machines, printers and multifunctional printers. However, the list of common error codes found in them can confuse even the most experienced troubleshooter. Here we explain common errors and how to troubleshoot them.
Error code E50: Fuser unit damage
This can happen either when the heat roller has been destroyed or damaged. Make sure to replace your Brother laser printer with a new heat roller.
Error code E51: Fault with protection in the laser beam
This error code indicates that the beam,Curling Tongs, mirrors or the lid is not seated properly. Make sure to adjust these in order to get your Brother laser printer back working again.
Error code S05: Error with data bus
This type of error code means that the data transmission on the parallel port is affected. Most of the time,nike outlet, this problem can be handled effectively by just resetting your printer.
Error code ��machine error��: board issues
This kind of error code will usually be indicated with a loud continuous beep on your Brother Fax machine. You need to check on the solder joints to see if these are cold over the power supply place. You also need to check for these joints on all other boards before you go for a replacement. If you find no improvement even after replacement then try changing the capacitors over the board for the power supply.
Error message ��Black pages��
This error code typically implies black pages being printed out on your Brother laser printer. This usually happens frequently on the Brother 960 and Brother 1260 model varieties. It means that the HVPS is at fault. You will need to replace the following diodes and put jumper wire instead. Diodes D31, D33,cheap tennis rackets, D30 and D32 will need replacement. For the jumper wire you will need a gauge of 22.
Error message ��Check paper path��
The error lies with the paper path which can be rectified by taking out paper hopper. Then simply clean the eject rollers of the paper.
Error message ��Cutter problems��
This type of error message gets displayed when there is either a paper jam or the device is not cutting paper properly. You need to check if the cutter spring is defective or not. Make sure to take out the cutter and clean as well as lubricate it. In case the issue does not get solved try replacing the gear train.
Error message ��Poor copy quality��
Sometimes you may come across some grey colored dots on the paper you have just faxed. Make sure to check if the glass and the scanning mirrors are clean. If these are clean then the issue lies with the camera. You could try troubleshooting by just unplugging the Brother Fax machine for at least a whole night. You might just avoid having to shell out on a camera replacement,five fingers flow!
 
   birkenstocks cheap-Air Jordan 13 8216;Altitude8217
 
   tod-Nike Air Yeezy 2 Debut - S
 
   cheap bose headphones-Creating Unique Nicknames Ou
 
 
The Nike Air Max 09 was the first of its kind when it was released in 1990. Nike revolutionized running shoes when it released the Air Max 1 in 1987 being the first shoe to have visible Nike Air Max 90 cushioning. The Nike Air Max 90 was the first running shoe in history to have forefoot and heel Nike Air Max 90 cushioning.The Nike Air Max 90 was a huge hit when it was released. It came out in many famous colors that have been retroed many times such as the Neons, Slates, and Emeralds. TheNike Air Max 90 was so successful that it was first?only 2 years after its release in 1997/1998.The Nike Air Max 90 was also the first Nike shoe to have an Nike Air Max 90 heel which was compressed to different pressures. The air pressure ranges from a low 5PSI in the back of the heel to 25PSI directly underneith the heel to provide optimal cushioning. Not only did the Nike Air Max units provide second to none cushioning, but it provided great heel support.Since theNike Air Max 90 were running shoes, they had 3M reflective material on the back and front of the shoe. The reflective material makes the shoes very visable with even the lowest of indirect light hitting theNike Air Max 90 shoes.At first, the Nike Air Max 90 was designed for performance and function, but it lately has been bought more for fashion and casual wear. One can't help but fall in love with the design and shape of theNike Air Max 90 shoes. TheNike Air Max 90 is a favorite among people from all walks of life from yuppies to people of the hip hop community - it is one of many shoes that unites sneakerheads.Without stating the totally obvious, the Nike Air Max 90 was part of the History ofNike Air Max 90package. Even though Nike released theNike Air Max 90 Neons in 2002, 2003, and 2004, Nike sure enough released the same colorway again at the end of 2005. This made manyNike Air Max 90fans angered since many paid a premium price for the Neons. A sigh of relief was exhaled when collectors saw how poor the quality was of the History of Air MaxNike Air Max 90s.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.10 | SMF © 2006-2009, Simple Machines LLC
Installed by Installatron
Valid XHTML 1.0! Valid CSS!